Blaupunkt FHM401 Bedienungsanleitung Seite 9

FHM401
1. On/Off knob
2. Thermostat regulation knob
SAFETY FEATURES
1. In case of overheating, thermostat will turn off the device. Unplug the heater and wait until it
cools down. Find the cause of overheating. Heater can be plugged in and switched back on after
cooling down.
2. If the device tips over, a safety switch will automatically switch it off. Put it back in vertical
position in order to switch it on.
USE
Fan heater has 3 settings:
1. Cool blow (only fan is operating)
2. 1000W (medium heat)
3. 2000W (maximum heat)
Turn on device by switching the on/off knob to required mode and turning the thermostat regulation
knob.
Thermostat allows adjusting the temperature of heating. Fan heater will maintain the chosen
temperature.
CLEANING AND MAINTENANCE
Before cleaning the heater make sure that it has been switched off, unplugged from the power socket.
Make sure the device has cooled down sufficiently.
Air inlets and outlets should be free of dust. Clean with dump cloth and wipe dry.
3. Oscillation switch
7