Bi-Wire Connection - Yamaha NS-F350 Bedienungsanleitung

Bi-wire connection

■ About bi-wire connection
This speaker system is capable of bi-wire connection. To connect the speaker to the output terminals of the amplifier (or
receiver), two pairs of cables for each of mid-range/woofer and tweeter used instead of standard connections.
This type of connection decreases the modulation distortion caused by electric resistance of the cables and driving current
of the speakers.
Consequently, purer sound quality can be expected.
To utilize bi-wire connection, remove the short bars from the terminals first, and then connect the midrange/woofer and
tweeter to the amplifier separately using two pairs of cables.
If necessary, use a commercially available speaker cable to connect the speaker system.
Tweeter terminals
Black (–)
Short bar
Midrange/woofer
terminals
1
NS-F350
NS-F330
(R)
SPEAKERS
R
+ –
Amplifier or
Receiver
Red (+)
NS-F350
NS-F330
(L)
L
– +
Connecting to your amplifier
Remove the short bars before connecting.
When your amplifier has only one set of
speaker output terminals.
☞ 1
When your amplifier has two sets of
speaker output terminals.
☞ 2
2
NS-F350
NS-F330
(R)
SPEAKERS
R
+ – –
Amplifier or
Receiver
Both SPEAKERS A and B should be connected.
NS-F350
NS-F330
(L)
L
A
+
B
3
En