Setting The Mode Of Operation - Märklin 78 Series Gebrauchsanleitung

2.2 Setting Locomotive
Parameters
The mode of operation and the
multi-train address are set with the
10 coding switches on the multi-train
electronic circuit.
Caution! Do not confuse the
10 coding switches for the mode
of operation and for the address
on the digital circuit board with
the 8 coding switches on the
sound effects circuit board!
2.2.1 Setting the Mode
of Operation
1. Removing the body (=> page 41).
2. Setting the coding switches.
Switch 10 (0) at off:
Operation with AC power
Switch 10 (0) at on:
Operation with DC power
The multi-train operation mode
(Digital / Delta / Märklin Systems)
is automatically recognized.
2.2.2 Setting a Multi-Train
Address
1. Removing the body (=> page 41).
2. Set the desired address with
switches 1 to 8.
Example: 78 is the desired address.
Switches 1 at on.
Switches 2, 3, 4, 5, 6, 7, 8 at off.
2
Operation
Important:
Switch 9 must always be set at off.
17