Herunterladen Inhalt Inhalt Diese Seite drucken

Reference Point Mode; (How To Use The Measuring Unit With A Reference Point) - Sony LH71-1 Anleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

7-2-9. Reference Point Mode

(How to Use the Measuring Unit with a Reference Point)

Can be combined with a measuring unit with a reference point.
When you use a reference point, you can relocate the machining datum point to the same position. If the tape
moved, for example, when the system power supply was off, it is possible to relocate the machining datum
point in its initial position.
Set the reference point offset using reference point position detection or by inputting an offset value.
* The reference point offset is the distance (L) from the reference point of the measuring unit to the machining
datum point.
* The reference point is also used as the datum when setting segmented error compensation. Regarding the
use of a reference point when setting segmented error compensation, see "5-5-2. Segmented Error
Compensation".
Milling Machine
Movement
Machining
L
datum
point
Workpiece
Machine table
Measuring unit with a
reference point
Pick-up head
<Setting/storing a reference point offset (reference point hold)>
Set/store the reference point offset (L). When the reference point position is detected, the count is held.
By storing this value, the machining datum position is relocated.
Milling Machine
Across
reference
point
L
Machining
datum point
Set the datum point in advance.
1
Press the
key. (
2
Press the
key corresponding to the axis to be put into a
reference point hold status, and then press the
A reference point wait status is activated. (Current value flashes)
LH71
Cutting tool
Measuring unit reference
point (absolute reference
point)
Reference
Measuring length
point mark
indicator mark
(on both sides)
Measuring unit
reference point
lamp lights up)
Lathe
Workpiece
Measuring unit reference
point (absolute reference
point)
Machine table
Measuring unit with a
reference point
Pick-up head
Lathe
Workpiece
Across reference
point
Measuring unit
reference point
Display
r
key.
7. Operation Method
Cutting tool
Machining
L
datum point
Reference
Measuring length
point mark
indicator mark
(on both sides)
L
Machining
datum point
(Current value
(ABS))
(Flashes)
7-15
(E)

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Lh71-2Lh71-3

Inhaltsverzeichnis