Emptying Water Container; D) Storage - Conrad 8000 BTU Bedienungsanleitung

Attention!.Never.use.the.device.without.air.filters.
c) Emptying water container
• Empty the inner water container when it is completely full. The indicator light W.F.(14).will.flash.and.a.signal.will.
sound. The device cannot be operated.
• Disconnect the power plug from the power outlet.
• Place a suitable container under the drainage opening. Twist the fastener (a) off and pull the plug (b) from the
drainage opening (Dia. F).
• Let the water drain. When the container is almost full, close the drainage opening again using the plug; empty the
container and repeat the process until water stops dripping.
• Reinsert the plug (b) into the drainage opening and twist the fastener (a) back on.
• When you switch the device on, the indicator light W.F (14) no longer lights up.
• Do.not.leave.the.device.unsupervised.while.emptying.the.water.container..The.container.may.overflow.
• If the device will not be used for a long period of time, use the key
and let it run in ventilation mode for several hours on a warm, dry day. This will help dry the interior of the device
completely. We also recommend leaving the device standing for one day without fastener and plug, to air dry it.

d) Storage

Store the device in a cool, dry, clean location protected from sun exposure, and in the original packaging
if possible.
a
Dia. F
(25, 36) to switch it on prior to storing it,
b
29