Herunterladen Inhalt Inhalt Diese Seite drucken

E) Timer (Timer); F) Sleep Mode (Sleep) - Conrad 8000 BTU Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

e) Timer (TIMER)

Automatic on
• You can specify the time until the device switches on automatically from standby mode.
• Push the key
(30, 35) to select the desired time period (1 – 24 hours).
• The indicator light TIMER.(18).lights.up.and."01".(=1.hour).will.flash.on.the.display..
• Push the key
(30, 35) repeatedly to select the desired time period. For example, if you would like to set three
hours, push the key
• Once.the.hour.display.stops.flashing.your.settings.are.confirmed.
• To switch the timer off, push the key
TIMER (18) will go out.
• The device switches on automatically after the pre-set time has elapsed.
Automatic off
• When the device is switched on, you can specify the time until the device switches off automatically.
• Push the key
(30, 35) to select the desired time period (1 – 24 hours).
• The indicator light TIMER.(18).lights.up.and."01".(=1.hour).will.flash.on.the.display..
• Push the key
(30, 35) repeatedly to select the desired time period. For example, if you would like to set three
hours, push the key
• Once.the.hour.display.stops.flashing.your.settings.are.confirmed.
• To switch the timer off, push the key
TIMER (18) will go out.
• The device switches off automatically after the pre-set time has elapsed.

f) Sleep mode (SLEEP)

• Select the operating mode "Cooling". The sleep mode is possible only in the operating mode "Cooling".
• Push the key
(27, 39) to enter sleep mode. The fan speed is set on low.
• Once you selected the sleep mode, the temperature will increase by 1 °C after one hour. After another hour, the
temperature will again increase by 1 °C and will then remain constant.
• The sleep mode is not possible ,
- if the water tank is full (indicator light W.F = "Water Full" will light up).
- if the devices in standby mode.
.(30,.35).three.times.."03".will.flash.on.the.display.
.(30,.35).repeatedly,.until."00".flashes.on.the.display..The.indicator.light.
.(30,.35).three.times.."03".will.flash.on.the.display.
.(30,.35).repeatedly,.until."00".flashes.on.the.display..The.indicator.light.
27

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

10000 btu

Inhaltsverzeichnis