Start-Up Operation; Unpacking And Inspection; B) Assembly - Conrad 8000 BTU Bedienungsanleitung

7. Start-up operation

a) Unpacking and inspection
Attention! The product is heavy. We therefore recommend that two people remove the packaging of the
product.
• Set packaging aside carefully.
• Open.the.bottom.of.the.packaging.and.fold.the.bottom.flaps.toward.the.outside.
• Put the product into a vertical position and remove the packaging by putting it up.
• Let the product stand in a vertical position for at least two hours prior to switching the product on.
• Inspected the content of the packaging for completeness and damages. If the content of the packaging is
incomplete or if damages are found, do not operate the product. Return it to your seller immediately.
• Comply with statutory provisions to dispose of the packaging material.
• Store the packaging material if you would like to use it to package, ship, or transport the device in any way. Store it
in such a way that it does not pose a potential risk.

b) Assembly

Dia. A
• First pull apart the exhaust hose (12) on one side. Attach the adapter (13) on the exhaust hose by twisting it onto
the exhaust hose counter clockwise (Dia. A). The exhaust hose can be pulled out and bent into the desired shape.
• Then attach the exhaust hose (12) with the adapter onto the exhaust opening (8) by twisting it counter clockwise
(Dia. B).
• Place the device near a window or a door. Carefully pull out the exhaust hose (12), if required. We recommend
keeping the length of the hose as short as possible.
• Open the window and measure the width of the window. The window guide (10) can be used only with sliding
windows.
• If the window is too wide for the window guide (10), you can obtain an additional window guide from your seller.
Obtain information from your seller.
• If the window is too narrow for the window guide (10), remove the inner part of the window guide.
• Shorten the inner part of the window guide (10) to the desired length.
• Insert this into the outer part of the window guide (10) and extend the window guide to the required length on the
window.
24
Dia. B Dia. C