Parameter / Register - Märklin 58341 Bedienungsanleitung

CV Discription
01 Address
08 Factory Reset / Manufacturer Recognition
13 PoM Functions F1 - F8 in analog operation
14 PoM Functions F9 - F15 and lights in analog operation
17 Extended address (upper part CV29 Bit 5 = 1)
18 Extended address (lower part CV29 Bit 5 = 1)
19 Multiple Unit Address
21 PoM Functions F1 - F8 on Multiple Unit
22 PoM Functions F9 - F15 and lights on Multiple Unit
Bit 0: Reversing direction
Bit 1: Number of speed levels 14 or 28/128
29
Bit 2: allow analog operation
Bit 5: Short/long address
75 Following address
( ) Values = factory settings
DCC: programming on the programming track by means of CV programming,
programming with PoM (Program on the Main); this must be supported by the controller you are using.
* The values for the desired setting must be added!
Example: The number of speed levels 28/128 = 2 + allow analog operation = 4, results in the value = 6
Betrieb • Operation • Fonctionnement
6021 Value DCC Value
01 – 80 (34)
CV 29/Bit 5 =0
08
—
—
— 192 – 255 (192)
— 0 – 255 (128)
—
—
—
—
01 – 80 (35, 36, 37)
9
1 – 127 (3)
08 (131)
0 – 255 (0)
0 – 255 (1)
0 – 255 (0)
0 – 255 (0)
0 – 255 (0)
0 / 1 (0)*
0 / 2 (2)*
0 / 4 (4)*
0 / 32 (0)*
Exploitatie • Operación • Operazione