Other Operations - Pioneer PDP-50MXE1 Bedienungsanleitung

Other Operations

Setting the orbiter (ORBITER)
At set time intervals (about once every 8 minutes), this
function automatically changes the screen display
position by incremental amounts. The amount of screen
movement is 1 pixel horizontally or vertically.
When displaying a still image, setting [ORBITER] to [ON]
helps prevent the screen from being burnt with a lag
image.
÷ This function is not supported when using the POINT
ZOOM function, multiscreen function, or menu display.
Note
The [ORBITER] setting affects all input sources.
MENU
5/∞
2/3
SET
Main unit operating Remote control unit
panel
1
Press the MENU button to display the menu
screen.
MENU
PICTURE SCREEN
:
CONTRAST
:
BRIGHTNESS
:
R.LEVEL
:
G.LEVEL
:
B.LEVEL
:
H.ENHANCE
:
V.ENHANCE
PICTURE RESET
2 Use the 2/3 buttons to select [OPTION].
MENU
PICTURE SCREEN
LANGUAGE
ENERGY SAVE
SCREEN MGT.
ORBITER
MASK CONTROL
AUTO SET UP MODE
AUTO FUNCTION
AUDIO OUT
ENTER
S E T
MENU
2/3
SET
5/∞
INPUT1
SETUP OPTION
0
0
0
0
0
0
0
INPUT1
SETUP OPTION
:
ENGLISH
: STANDARD
:
OFF
:
OFF
:
ON
:
INACTIVE
:
OFF
: FIXED
EXIT
M N U
E
3 Use the 5/∞ buttons to select [ORBITER].
MENU
PICTURE SCREEN
LANGUAGE
ENERGY SAVE
SCREEN MGT.
ORBITER
MASK CONTROL
AUTO SET UP MODE
AUTO FUNCTION
AUDIO OUT
4
Press the SET button to activate the setting.
The factory default setting is [OFF].
Each time the button is pressed, the setting alternates
as follows:
3 OFF
ON 2
5
When finished with the setting, press the MENU
button to return to the normal screen image.
Side mask position
(MASK CONTROL)
When screen size is set to [DOT BY DOT] or [4:3], or
when using multiscreen display, the position of the black
stripes on the side of the screen and the position of the
subscreen are changed slightly each time the power is
turned on, in order to alleviate burning of lag images on
the screen.
MENU
5/∞
2/3
SET
Main unit operating Remote control unit
panel
1
Press the MENU button to display the menu screen.
MENU
PICTURE SCREEN
CONTRAST :
:
BRIGHTNESS
:
R.LEVEL
:
G.LEVEL
:
B.LEVEL
:
H.ENHANCE
:
V.ENHANCE
PICTURE RESET
INPUT1
SETUP OPTION
: ENGLISH
:
STANDARD
:
OFF
: OFF
:
ON
: INACTIVE
: OFF
:
FIXED
MENU
2/3
SET
5/∞
INPUT1
SETUP OPTION
0
0
0
0
0
0
0
29
En