Mounting With Module Clamps On The Shorter Module Side - LG LG240M1C Installationsanleitung

Mechanical Installation
Mounting with Module Clamps on the
Shorter Module Side
The solar modules can also be fastened
to the mounting system with module
clamps. To do this, use four module end
clamps for every solar module. Using
suitable module clamps, ensure that
measurements A, B and C are observed
in line with the following graphic.
Clamp width A
Clamp depth B
Bracket width C
C
36
min. 30 mm
min. 5 mm
min. 10 mm
B
Position the module clamps uniformly
on the solar module in accordance with
the following graphic. In doing so, ensure
that D is not below 150 mm and does
not exceed 270 mm.
D
D
150 mm ≤ D ≤ 270 mm
Permitted position of the module clamps
Necessary dimensions of the module
clamps
D
D