Overheating Guard; Transport; 1. Maintenance; Storage - Parkside PESG 120 A1 Originalbetriebsanleitung

Important!
Do not dab the workpiece with the electrode since
it could be damaged, making it more diffi cult to
ignite the arc.
As soon as the arc has ignited, attempt to keep it
a distance from the workpiece equivalent to the
diameter of the electrode. This distance should be
kept as constant as possible during the welding
process. The angle of the electrode in the direction
in which you are working should be 20/30°.
Important!
Always use tongs to remove spent electrodes and
to move parts that you have just welded. Please
note that the electrode holder (5) must always
be put down so that it is insulated after you have
completed the welding work. Do not remove the
slag until the weld has cooled. If you want to con-
tinue a weld after an interruption, the slag from
your initial attempt must fi rst be removed.

9. Overheating guard

The welding set is fi tted with an overheating guard
that protects the welding transformer from over-
heating. If the overheating guard trips, the control
lamp (7) on your set will be lit. Allow the welding
set to cool for a time.

10. Transport

Before transporting the welder you must fi rst dis-
connect the power plug and remove the ground
terminal from the workpiece. Then wind up the
cable properly. Now you can carry the welder to
a different place by the carry handle (1).

11. Maintenance

Remove dust and dirt from the equipment at regu-
lar intervals. Cleaning is best carried out with a
fi ne brush or a cloth.
Anl_1549055.indb 48 Anl_1549055.indb 48
GB/MT

12. Storage

Store the equipment and accessories out of
children's reach in a dark and dry place at above
freezing temperature. The ideal storage tempe-
rature is between 5 and 30 °C. Store the electric
tool in its original packaging.

13. Ordering replacement parts

Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
For our latest prices and information please go to
www.isc-gmbh.info

14. Disposal and recycling

The unit is supplied in packaging to prevent its
being damaged in transit. This packaging is raw
material and can therefore be reused or can be
returned to the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic. De-
fective components must be disposed of as spe-
cial waste. Ask your dealer or your local council.
- 48 -
17.10.12 16:34 17.10.12 16:34