Features - Klarstein 10013323 Handbuch

Notes on Installation
• The incline angle of the cabinet could not be over 45° during transportation.
Don't make ice maker upside-down in case the compressor or refrigerating system
troubles occur.
• When use for the first time or when restart after long period of unused, the ice made
for the first two times is not edible.
• The ice make should be placed on horizontal and structurally sound ground and
away from heat source and corrosive gas. At least about 150 mm room should be
left around the ice maker to ensure the fine ventilation.
• Please adjust the feet when placing the ice machine, otherwise the water level and
the shape of ice will be affected. Before using the ice machine for the first time, you
should wait about 12 hours after positioning it.
• The outlet of drainage tube should be lower than cabinet so as to drain water easily.
• The separate outlet should be used and the grounding must be good.

FEATURES

For the water reycle system,the biggest advantage is water saving and energy saving.
Becasue the water in the innerline will be used for the next recycle of ice making.Many
other advantages of the ice maker are available, such as ice making quickly, great ice
making capacity, nice ice shape and ice dropping quickly.
Water inlet ~ water filling ~ ice making ~ water releasing and ice dropping, all these
processes are automatically controlled for ice making continuously.
In case of water shortage or ice full in cabinet, the indicator on the operation board will
light on accordingly and the ice maker will stop operation automatically. The ice storage
cabinet is PU foamed, so it is insulated well and it could prevent the ice from melting.
EN
13