Place Of Installation - Pioneer PLX-1000-N Bedienungsanleitung

Connecting to a DJ mixer
Ground wire
Audio
cable
Analog player
1 Connect the audio cable and ground wire to the [PHONO] input terminal of the DJ mixer.
If this product is connected to a DJ mixer that does not have a [PHONO] input terminal, sufficient volume and sound quality cannot be
obtained.
Make sure to connect the ground wire. If the unit is not properly grounded, a power hum (humming sound) occurs.
2 Connect the power cord.
Connects to a power outlet using the included power cord. Wait until all connections between the equipment are completed before connecting the
power cord.
Before connecting to the outlet (AC outlet) mounted on the connected equipment, check the wattage displayed on the outlet. (This unit con-
sumes 9 W of power.)

Place of installation

Place the unit on a level surface that is free of external vibration.
To the extent possible, keep the unit away from the speaker system.
When the unit is very close to a radio (AM/FM broadcasting), the radio could generate noise. Keep the distance as far away from the unit as possible.
Adjusting the height of the main unit
Adjust the height by turning the insulator in a way that the main unit is horizontal.
Ground wire
Audio cable
DJ mixer
L
R
Power cord
Rear panel
To power outlet
En
11