Introduction; Intended Use; Features - Parkside PDRS 6.3 A1 Bedienungs- Und Sicherheitshinweise

Introduction

The following pictograms are used in these operating instructions / on the equipment:
Please read the operating instructions!
Note
Observe the warning and safety
instructions!
Caution! Explosion hazard!
Oil daily
Pneumatic ratchet set PDRS 6.3 A1
Introduction
Congratulations!
You have chosen high-quality device
by our company. Familiarise yourself
with the product before using it for the first time. In
addition, please carefully refer to the operating in-
structions and the safety advice below. Initial operation
of this tool must be performed by trained personnel.
KEEP OUT OF THE REACH OF CHILDREN!

Intended use

The ratcheting screwdriver is a handy, compressed-air
powered device for use by handymen and at garages.
It is suitable for securing and removing screw con-
nections in the automotive area (tyre installation, etc.)
as well as the agricultural area. Please note the torque
specifications when tightening screws and nuts. If
necessary, use a torque wrench. The socket attach-
ment is quick and easy to change. Compressed air
is connected with a plug nipple and quick connector.
Only use the product as described and for the indi-
cated purpose. Keep these instructions in a safe place.
6 GB/CY
Never use hydrogen, oxygen, carbon
dioxide or other bottled gases as an
energy source.
Wear ear protection, dust mask, safety
glasses and protective gloves.
Compressed air hose
Dispose of packaging and device in
an environmentally-friendly way!
When passing this product on to others, please also
include all the documents. Any use other than the
intended is prohibited and potentially dangerous.
Damages resulting from noncompliance or misuse
are not covered by the warranty and are not included
in the manufacturer's liability. This device has been
designed for household use and may not be used
for commercial or industrial purposes.

Features

Check that all the items are present and
that the device is in perfect condition im-
mediately after unpacking. Do not use
the device if it is defective.
Ratchet head
1
Trigger
2
Compressed air connection
3
Plug nipple for compressed air supply
4
Bits
5
Oil reservoir
6
Socket key
7
Extension
8
Bit holder
9
U-joint
10
Pivot bolt
11