PSI Matrix PP 407 Benutzerhandbuch Seite 168

Escape Sequence
ESC ] > s
ESC [ > P1 ; P2 ; P3; P4 s
(Native Command)
ESC [ > P1 s
(Native Command)
ESC [ > ;P2 s
(Native Command)
ESC [ > ;;P3 s
(Native Command)
ESC [ > ;;;P4 s
(Native Command)
PP 408 only
Mnemonic Function
IF Insert Form
Select Paper Source and Insert Form (>),
SPSIF
Select Paper Source,Print Gap, Paper Exit.
Select Paper Source:
P1 = 6 Upper Tractor
P1 = 7 Lower Tractor
SPS
P1 = 15 Upper and lower Tractor
Print Gap:
P2 = 0 : Automatic Gap Control
P2 = 1 Print Gap for 1-ply copy
P2 = 2 Print Gap for 2-ply copies
AGC
P2 = 3 Print Gap for 3-ply copies
P2 = 4 Print Gap for 4-ply copies
P2 = 5 Print Gap for 5-ply copies
P2 = 6 Print Gap for 6-ply copies
Paper Exit:
P3 = 0
PE
P3 = 1 or 2
P3 = 3 :
P4 = 0 : Cut Mode Off
P4 = 1 : Cut Mode On
CUT
P4 = 2 : Cut on actual position
(cutting edge is approximate 4 mm above
the base of the actual line
reserved (no change)
Paper Exit Stacker (PP408)
Batch output (rear), default
Appendix D-4