Herunterladen Inhalt Inhalt Diese Seite drucken

Proper Use; Before Starting The Equipment; Technical Data - EINHELL TC-EH 500 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für TC-EH 500:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
Original operating instructions

3. Proper use

The cable hoist is designed for lifting and lowering
loads in enclosed areas commensurate with the
machine's capacity.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Voltage (V) ..................................... 230 V ~ 50 Hz
Rated current (A) ............................................ 4,4
Power consumption (W) ............................... 1000
Operating mode ........................... S3 20% 10 min
Rated load (kg) ......................................250 / 500
Lifting height (m) ....................................11,5 / 5,7
Rated speed (m/min) .....................................8 / 4
Diameter of steel cable (mm) .......................... 4,0
Tensile strength of the
steel cable (N/mm²) ..................................... 1870
Insulation class .................................................. B
Protection type ............................................. IP 54
Drive unit class ................................................ M1
Net weight (kg) .............................................. 16,2
Operating mode S3 – 20% - 10 minutes:
S3 = Intermittent mode without infl uencing the
starting process. This means that the maximum
operating period over a time of 10 minutes is
20% (2 minutes).
Anl_TC_EH_500_SPK9.indb 15
Anl_TC_EH_500_SPK9.indb 15
GB
Keep the noise emissions and vibrations to a
minimum.
Only use appliances which are in perfect wor-
king order.
Service and clean the appliance regularly.
Adapt your working style to suit the appliance.
Do not overload the appliance.
Have the appliance serviced whenever ne-
cessary.
Switch the appliance off when it is not in use.
Wear protective gloves.

5. Before starting the equipment

Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Warning!
Always pull the power plug before making
adjustments to the equipment.
The cable hoist is not suitable for transporting
hot and/or molten masses and in addition it is
not suitable for use at low temperatures or in
aggressive atmospheres.
It is in mechanical group M1.
The service life of the cable hoist is approxi-
mately 8000 cycles (excluding wearing parts).
When the hoist has completed 8000 cycles,
all its mechanical parts must be checked and
overhauled.
Read and absorb the operating instructions
before you use the cable hoist.
Ensure that the operator knows how the ma-
chine works and how it should be operated.
The user should always operate as set out in
the operating instructions.
The cable hoist is not designed for conti-
nuous operation. Its mode of operation is:
Intermittent mode without influencing the star-
ting process.
The rated capacity of the machine does not
vary due to the position of the load.
5.1 Unpacking
After opening the packaging, inspect the frame,
the steel cable, the hook and the electric control
mechanism for signs of possible transit damage.
- 15 -
24.05.2017 11:41:00
24.05.2017 11:41:00

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis