Changing The Nozzle; Further Examples Of Uses In The House, Car And Garden; Cleaning - Parkside PHLG 2000-2 Bedienungs- Und Sicherheitshinweise

Operation / Cleaning
Use as free-standing unit / during
cooling (see Fig. B, E):
j
Always set the device down upright on
a level surface, this will allow
· you to have both hands free
· the device to cool

Changing the nozzle

Q
WARNING!
Too much heat causes paints
and plastics to ignite.
CAUTIoN! Do not inhale the resulting vapours.
Reflector nozzle
4
pipes or tubes (see Ill. B):
j
Place the reflector nozzle
tube .
3
j
Fill the pipe or tube with sand and ensure it is
closed at both ends. This will prevent the pipe
or tube from kinking.
j
Warm the pipe evenly, in that you move it
back and forth.
Protector nozzle
5
and varnish (see Ill. C):
j
Place the protector nozzle
outlet tube .
3
j
The spatula shape of the nozzle ensures the air
is properly directed. Use a separate spatula for
removing paint or varnish.
Flat nozzle – for detaching glues,
6
softening paint (see Ill. D):
j
Place the flat nozzle
j
Do not apply heat for too long a period, as
burnt paint becomes much more difficult to
remove. Many glues can be softened by warm-
ing. Glued connections can then be detached
and excess glue removed.
Reducing nozzle
7
j
Place the reducer nozzle
outlet tube .
3
j
Use the reducing nozzle
sleeves and film.
18 GB
– for shaping plastic
on the outlet
4
– for removing paint
on the
5
on the outlet tube
6
– for welding plastic:
on the
7
for heat-shrinkable
7
Further examples of uses in
Q
the house, car and garden
Defrosting water pipes:
Notice! It must not be used for thawing PVC pipes.
Notice! It is often very difficult to tell the differ-
ence between gas pipes and water pipes. If in
doubt, ask a competent person.
Notice! Copper pipes are joined using tin solder
and must not be heated above 200 °C.
j
Use the reflector
Loosening a threaded connection:
j
Heating the threaded connection carefully can
often allow the connection to be released.
Removing weeds:
j
The heat dries out the weeds and micro-
organisms.
Lighting barbecue charcoal:
WARNING!
j
Charcoal ignites in a few minutes.
Wax removal:
j
You can remove wax residues from skis / snow-
board or from candle holders. Use the amount
of care appropriate to the product.

Cleaning

Q
WARNING!
. appliance, always remove the plug from the power
3
socket.
j
Keep the air inlet and outlet clean.
j
Use a cloth to clean the housing. Use a soft
cloth to clean the housing. Never use petrol,
solvents or cleaning agents as these may
attack the plastic.
to defrost water pipes.
4
Do not use methylated alcohol.
Before carrying out work on the