Replacing The Fuse - Powerfix PLS 10 A1 Bedienungsanleitung

Powerfix PLS 10 A1

Replacing the fuse

If the 12/24 V car charger cable (C) is connected but the LED indicator of the 12/24 V car
charger cable (C) does not light, the fuse might be defective.
To replace the fuse, proceed as follows:

Rotate the screw cap (d) counter-clockwise and remove it from the cigarette lighter plug
housing (a). If necessary, use a pliers.

Replace the fuse (b) with a new fuse of the same type. You can purchase a suitable fuse
from any electronics retail outlet.

First insert the fuse (b) into the cigarette lighter plug housing (a).

Insert the metal contact (c) into the screw cap (d).

Next insert the screw cap (d) with the inserted metal contact (c) over the fuse (b) and
then screw the cap (d) clockwise onto the cigarette lighter plug housing (a).
24 - English
WARNING! If you need to replace the fuse, make sure to use a fuse
of the same type (see the Technical Specifications).