Parts Diagram; Machine Specific Safety Instructions - Blaupunkt STSA 754211 Bedienungsanleitung

Parts Diagram

9
8
Machine Specific Safety Instructions
Know your jig saw. Do not plug the charger into the power source or install the battery in the tool until you have read and
understand this Instruction Manual. Learn the tool's applications and limitations, as well as the specific potential hazards related to
this tool. Following this rule will reduce the risk of electric shock, fire, or serious injury.
• Remove all packaging materials and the transport safeguards, if present. Keep packaging materials away from children –
danger of suffocation!
• Always keep hands out of the path of the saw blade. Avoid awkward hand positions where a sudden slip could cause your
hand to move into the path of the saw blade.
• Keep hands away from the cutting area and the blade. Keep your second hand on the tool. If both hands are holding the saw,
they cannot be cut by the blade.
• Hold the tool by insulated gripping surfaces when performing an operation where the saw blade may contact hidden wiring
or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
• Always make sure the work surface is free of nails and other foreign objects. Cutting into a nail can cause the blade and the
tool to jump and damage the blade.
• Never hold the workpiece in one hand and the tool in the other hand when sawing.
• Never place your hands near or below the cutting surface. Clamping the material and guiding the tool with both hands is
much safer.
• Never lay the workpiece on hard surfaces like concrete, stone etc. The protruding blade may cause the tool to jump.
• Always remove the battery when changing the blade and when making adjustments.
• Use only "U" or "T" shank blades that are designed specifically for jigsaw use. Never use a broken blade, as it will not be securely
held in the tool.
• After changing a blade, ensure the blade is securely held in the blade holder. Loose blades will be violently thrown.
• Never touch the blade during or immediately after use. After use, the blade is too hot to be touched by bare hands.
2
1
7 6
3
4
5
1. Safety Lock Button
2. On/Off Switch
3. Motor Vents
4. Vacuum Adaptor
5. Sawdust Deflector
6. Tilting Base Plate
7. Cutting Action Lever
8. Blade Guide Roller
9. Blade Holder