Specifications - Sony HAP-Z1ES Referenzhandbuch

Specifications

Playback Specifications
Frequency response
2 Hz - 80 kHz (–3 dB)
Dynamic range
105 dB or higher
THD
0.0015% or less
Network section
Wired LAN
1000BASE-T/100BASE-TX/10BASE-T
Wireless LAN
Compatible standards
IEEE 802.11 b/g/n
Frequency band/channel
2.4 GHz band: channels 1-13
HDD section
Capacity
1 TB*
* Some portions of the capacity are used for data management.
Therefore, the capacity a user can use is less than 1 TB.
Supported playback format
DSD (DSF, DSDIFF), LPCM (WAV, AIFF), FLAC, ALAC, ATRAC Advanced
Lossless, ATRAC, MP3, AAC, WMA (2 channels)
Jack section
Output jacks
LINE OUT UNBALANCED
Output level: 2.0 Vrms (50 kilohms), Impedance: 10 kilohms or
higher
LINE OUT BALANCED
Output level: 2.0 Vrms (50 kilohms), Impedance: 600 ohms or
higher
EXT port
Type A USB, Hi-Speed USB, for connecting an external hard disk drive
8
GB
IR REMOTE OUT jack
for connecting the monaural mini-plug cable (supplied) or IR blaster
(supplied)
General and others
Power requirements
AC 230 V 50/60 Hz
Power consumption
On: 35 W
During standby mode (when [Network Standby] is set to [Off]): 0.3 W
During standby mode (when [Network Standby] is set to [On] and a
wired LAN is used): 2.6 W
During standby mode (when [Network Standby] is set to [On] and a
wireless LAN is used): 2.8 W
Dimensions (approx.) (w/h/d)
430 mm × 130 mm × 390 mm
including projecting parts and controls
Mass (approx.)
14.5 kg
Supplied accessories
AC power cord (1)
Remote control (RM-ANU183) (1)
R03 (size-AAA) batteries (2)
LAN cable (1)
Monaural mini-plug cable (1)
Audio cord (1)
IR blaster (1)
Quick Start Guide (1)
Reference Guide (this manual) (1)
Design and specifications are subject to change without notice.