Amplicomms RingFlash 100 Bedienungsanleitung Seite 31

ON DP
1 2 3 4 5 6 7 8
ON
1 2
You only need to change the Bell setting
if you have more than one Doorbell
connected to your RingFlash unit. The
two options are provided so that you will
know from the colour of the light on the
STOP button which Doorbell has been
pressed and which Door to answer.
Unclip the front cover of the Doorbell
by placing a small coin into the slot at
either end of the doorbell and twisting.
Using the 4 screws and wall plugs
provided, attach the Doorbell outside
your front door.
Shaker
You can plug a shaker accessory (not
included) into the socket '((o))' on
the back of the RingFlash unit. The
shaker will then vibrate when you
receive an incoming call.
For details of where to purchase a
compatible Shaker, please go to
www.amplicomms.com.
Starting Up
GB
31