Overview; Functional Description; Scope Of Delivery; Start-Up - Parkside PHD 150 A1 Originalbetriebsanleitung

Overview

A
1 Jet gun
2 Carrying handle
3 High-pressure hose on reel
4 Hose reel crank
5 Cable hook
6 Mains lead
7 Wheels
8 Strainer frame
9 Water supply
10 On/Off switch
11 Jet gun holder
12 High-pressure fitting (gun)
13 Opening of cleaning agent tank
14 Quick-action
water supply connector
15 Cleaning agent tank
16 Accessories holder
17 Jet tube w/ high-pressure nozzle
18 Jet tube w/ flat spray nozzle
19 Rotating brush
20 Nozzle cleaning pin
21 Cleaning agent

Functional description

The pressure washer uses high-pressure
water for cleaning.
A detergent can be added if this is re-
quired.
For the functions of the operating elements
please refer to the subsequent description.
Ensure that the safety instructions are al-
ways observed!

Scope of Delivery

Unpack the pressure washer and verify the
contents:
- Pressure washer with power supply
cable
- High-pressure hose on reel
- Cable hook
- Jet gun holder
- Quick-action
water supply connector
- Jet gun
- Jet tube w/ high-pressure nozzle
- Jet tube w/ flat spray nozzle
- Rotating brush
- Nozzle cleaning pin
- 0.5 l cleaning agent
- Fork spanner

Start-up

In keeping with current regulations
a pressure washer must never be
operated off the drinking water mains
supply without a controllable back-
flow preventer. A suitable backflow
preventer in conformity with EN
12729 type BA must be used.
Water that has passed through a backflow
preventer is classified as undrinkable.
A backflow preventer is available in spe-
cialist shops.

Setting up

• Slide the cable hook (5) and the jet
gun holder (11) onto the guides on the
device housing.
• Connect the high-pressure fitting (jet
gun) (12) to the jet gun (1). Use the
fork spanner from the package.
• Connect the quick-action water supply
connector (14) to the unit's water sup-
ply port (9).
• Plug in and turn the jet tube with high-
pressure nozzle (17) or the jet tube
with flat spray nozzle (18) or the rotat-
ing brush (19) to connect to the jet
gun (1).
• To change the jet tube (17/18) or the
rotating brush (19) push in the tube or
brush and turn in the opposite direc-
tion.
GB CY
7