Reely Audi R8 Bedienungsanleitung Seite 59

The vehicle doesn't drive in a straight line correctly
• Adjust straight driving using the trimmer „ST.TRIM" (see chapter 8, figure 1, item 7) at the transmitter.
• Check the steering rods or wheel alignment setting.
• Did your car have an accident? If so, check the vehicle for any defective or broken parts and replace them.
Steering or driving motions opposite to movement of steering wheel and transmitter throttle/brake lever
• Put the reverse switch for steering („ST.REV", chapter 8, figure 1, item 9) and drive („TH.REV", item 10) at the
transmitter in the right position.
• If the brushless motor is disconnected from the speed controller and reconnected, the alignment of the 3 connection
cables is not correct (this may not be possible with this vehicle, because there is no plug connection between the
motor and the speed controller). Simply swap two of the three cables between motor and speed controller. This will
reverse the rotational direction of the brushless motor.
58