English
WARNING
If an electrically conductive foreign object enters the terminals
of the lithium ion battery, a short-circuit may occur resulting
in the risk of fi re. Please observe the following matters when
storing the battery.
◯ Do not place electrically conductive cuttings, nails,
steel wire, copper wire or other wire in the storage
case.
SPECIFICATIONS
POWER TOOL
Model
Cutting Width
Max. Cutting Depth
No-load speed
2LSRK
Rechargeable
battery
2LJRK
Weight*
* Weight: According to EPTA-Procedure 01/2003
CHARGER
Model
Charging voltage
Weight
STANDARD ACCESSORIES
In addition to the main unit (1), the package contains the
accessories listed in the table below.
1 Box Wrench ............................................ 1
(for securing cutter blade)
2 Set Gauge .............................................. 1
(for adjusting cutter height)
3 Guide ...................................................... 1
(with set screw)
4 Carbide Blade ........................................ 2
P14DSL
(Double edged Blade type)
(2LSRK)
(2LJRK)
5 Charger .................................................. 1
6 Battery .................................................... 2
P18DSL
[P14DSL] BSL1430 or BSL1450
(2LSRK)
[P18DSL] BSL1830 or BSL1850
(2LJRK)
7 Plastic case ............................................ 1
9 Spare carbide Blade set ......................... 1
(Not supplied in all areas)
0 Blade Sharpening Ass'y ......................... 1
(for Resharpenable Blade Type)
14
P14DSL
BSL1430: Li-ion 14.4 V (3.0 Ah 8 cells)
BSL1450: Li-ion 14.4 V (5.0 Ah 8 cells)
3.2 kg (With BSL1430)
UC18YFSL
14.4 V - 18 V
0.5 kg
◯ Either install the battery in the power tool or store
by securely pressing into the battery cover until the
ventilation holes are concealed to prevent short-
circuits (See Fig. 5).
82 mm
2.0 mm
16000 min
-1
BSL1830: Li-ion 18 V (3.0 Ah 10 cells)
BSL1850: Li-ion 18 V (5.0 Ah 10 cells)
1 Box Wrench ............................................ 1
(for securing cutter blade)
2 Set Gauge .............................................. 1
(for adjusting cutter height)
3 Guide ...................................................... 1
(with set screw)
P14DSL (NN)
P18DSL (NN)
4 Carbide Blade ........................................ 2
(Double edged Blade type)
(for Resharpenable Blade Type)
Without chager, battery, plastic case and
battery cover.
Standard accessories are subject to change without notice.
P18DSL
3.3 kg (With BSL1830)