Herunterladen Inhalt Inhalt Diese Seite drucken

How To Connect - Conrad 75 03 70 Bedienungsanleitung

Wasserdichte s/w ccd-camera
Vorschau ausblenden Andere Handbücher für 75 03 70:
Inhaltsverzeichnis

Werbung

Use the spacer (4) to achieve a larger distance from
the wall.
Use the holes drilled in the bottom panel (3) as a drilling
stencil.
Make sure there are no electric lines, water
pipings, etc. near the envisaged drilling
points.
Fix the bottom panel (3) by means of the enclosed
screws.
Insert wall anchors, if necessary.
Use a suitable screw-driver.
Screw the thread (1) of the camera to the camera
bracket and lock the bolted joint by the locknut (6).

How to connect

Use a direct-current source with a 12 V out-
put as a power supply. Never try to operate
the camera at a voltage other than this one.
The direct-current source should be capable
of supplying a power of 110 mA as a mini-
mum load. Never overcharge the voltage
source.
24
The camera is connected to
the monitor/TV set via a BNC
line. The camera has a low-
voltage jack for voltage sup-
ply.
Jacks:
BNC jack (7):
Low-voltage jack (8): Voltage supply
Connect the direct-current source to the
low-voltage jack (8).
The direct-current source has to be
switched off.
Plug: 5.5 / 2.1 mm
Make sure the polarity of the voltage is cor-
rect.
Check by using a measuring instrument, if
required.
Join the video input to the BNC jack (7). If your moni-
tor/TV set should only have a cinch input you have to
use an adapter (BNC on cinch).
Video signal
25

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis