Technical Data; Specifications - Conrad 85 66 75 Bedienungsanleitung

Technical Data

Operating voltage DC
Power input
Sensor detection range
Monitor size
TFT image format
TFT resolution
Camera
DISP cable length
Length of screen cord
Length of alarm buzzer cord
Sensor cable length
Battery for remote control
Fuse
Operating temperature
Dimensions (W x H x D)
Weight
Always switch the monitor off with the remote control after using the external video input,
because the monitor does not turn off automatically in this mode.
Never expose the remote control to direct sunlight. Always place the remote control in a
shady place (e.g glove compartment).
12V/DC on-board supply net with minus pole on ground
ca. 620 mA (Standby ca. 40 mA)
approx. 40 - 200 cm
17.78 cm (7") diagonal
16:9 or 4:3 switchable
1440 x 234 pixels
CMOS colour camera with IR illumination
Image angle approx.. 90°
IR lighting: < 3 Lux
Cable pair NTSC: 1.4 m
Cable pair Video: 5.8 m
approx. 2 m
approx. 2.4 m
approx. 2.4 m
Lithium button cell CR2025
Fine fuse T2A/250V
-20 to +70°C
Mirror 260 x 106 x 26 mm
Control unit 100 x 72 x 26mm
Mirror 450g
Control unit 85g
37