Remote Control; Monitor Settings - Conrad 85 66 75 Bedienungsanleitung

Remote control

In the following, we will explain the function of the remote control.
Each press changes the corresponding function.
VIDEO
SELECT
MENU
MODE
SELECT

Monitor settings

The monitor can be set individually via the remote control. The setting menu can only be activated if
there is a video signal. In case of a blue screen (=no signal), it is not possible to make any settings.
If the system is only operated with one video source (reverse drive camera), please turn on your vehicle's
ignition and engage the reverse gear. The system turns on automatically.
If you use a second video source, you can turn the system on/off via the on/off button on the remote con-
trol.
To activate the settings menu, press the button
The monitor shows the first function. You can change the parameters
with the buttons. Each additional use of the MENU button switches to the next function. If you do not
press a button within 5 seconds, the setting menu closes.
The menu sequence is as follows:
BRIGHT brightness
CONTRAST contrast
COLOR colour setting
TINT colour hue
MODE Switch image format (16:9 wide screen or 4:3 normal image)
TCON Field viewing angle
LD = image display for reverse drive camera as "normal mirror view"
RD = image display for front camera as direct camera view
RU = front camera image is rotated by 180°
LU = reverse camera image is rotated by 180°
RESET Reset to factory settings (Button le/ri = execute)
34
On/off button: monitor can be turned on and off.
Button for switching the video source (AV1 = free/AV2 = camera)
MENU
Button for accessing the monitor setting functions.
Button for changing the parameters (reduction)
Button for changing parameters (increasing)
Key for changing the image format (16:9 / 4:3)
MENU