Anti-Shock Memory; Handling; Maintenance - Conrad CDX-10 Bedienungsanleitung

11. Anti-shock memory

The device is equipped with a digital anti-shock memory. This reduces the risk of skips during playback when the
device is subjected to vibrations.
The anti-shock memory is loaded automatically when the audio data is read. The device needs a few seconds until
the memory is full and can work optimally.
The saved data quantity corresponds to approx. 10 seconds music playback. During this time, the antishock memory
can „compensate" skips, which would otherwise result through short blows during music playback.

12. Handling

• Never connect the power plug to the wall outlet immediately after the device has been brought from a cold room
into a warm one. The condensation water created thereby may damage the device.
Allow the device to reach room temperature before connecting it. Wait until the condensation water has
evaporated.
• Never pull the mains plug by pulling the cable from the socket. Always only use the thus provided grip area.
• Remove the mains plug from the electrical outlet if the device is not in use for a longer period of time.
• For safety reasons always pull the mains plug from the socket during a thunderstorm.
• Music should not be listened to at an excessive volume for a longer period of time. This may damage your hearing.

13. Maintenance

Regularly check the technical safety of the CD player, for example, for damage to the mains cable or the housing.
If you have a reason to believe that the device can no longer be operated safely, disconnect it immediately and secure
it against being operated unintentionally. Pull the power plug out of the socket outlet !
It can be assumed that safe operation is no longer possible if:
• there is visible damage to the device or to the power line,
• the device no longer works
• it has been stored for a long time under unfavourable conditions
• it was exposed to extraordinary stress caused by transport
40