Herunterladen Diese Seite drucken

C) Automatic Station Finding/Storage; D) Manual Station Finding/Storage; E) Calling Stored Stations; F) Switching Stereo/Mono - Conrad DAV-4317 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für DAV-4317:

Werbung

c) Automatic Station Finding/Storage

With the key "APS" (A) you may activate the automatic station finding/storage when operating in the VHF-
range. In the display appears "SEARCH"; the DVD-receiver is now searching for stations and stores them in
the 20 storage positions. This searching procedure may take one or two minutes.
After that you may switch through all 20 storage positions pressing the key "STATION" (B).

d) Manual Station Finding/Storage

Set the desired frequency with the keys "TUNING+" (H) and "TUNING-" (I). Press the key "MEM" (C), the
display "MEM" starts flashing. After that select the desired storage position pressing the keys "TUNING+"
(H) and "TUNING-" (I) and press the key "MEM" (C) in order to store the manually set station. The display
"MEM" disappears in the display, the station is stores.

e) Calling Stored Stations

Press the key "STATION" (B) until the desired station is selected.

f) Switching Stereo/Mono

With the key "ST/MONO" you can switch from "Stereo" to "Mono" which is useful if a VHF-station is not
received well.

g) RDS-Information Display, Key "DISPLAY"

When operating in the VHF-range many stations transmit additional information, the so-called "RDS" (Radio
Data System). Press the key "DISPLAY" (on the remote control or at the front of the receiver) repeatedly in
order to call the following information:
PS
Name of the Station (e.g. BBC World Service)
PTY
Type of Programme (e.g. "POP")
CT
Current Time Display (e.g. "11:43")
RT
Text Display (e.g. additional information of the radio station, www-address, date, etc.)
Please note that the transmitted information varies from VHF-station to VHF-station! Some
transmit only the name of the station and no further information.
Moreover it can take some time (up to 1 minute) until the information stated above (name of the
station, type of the programme, time, text) appears in the display.
A good reception is essential for displaying the information, a cable connection is the optimum.
h Searching for Certain Types of RDS-Programmes, Key "PTY
SEARCH"
As already described under point g) many stations transmit additional information, among other things the
type of the programme.
The following types of programmes can be chosen (sometimes other or more types are on offer):
40
Dans le réglage de base /état de livraison le code est "3308".
Entrez ensuite un nouveau code de 4 chiffres dont vous pourrez facilement vous souvenir. Pour plus de
sécurité, il faut entrer ce code une nouvelle fois avant qu'il soit accepté.
Au cas où vous auriez oublié le code, il est possible d'effectuer une remise à zéro, un "Reset" de l'ampli
tuner DVD ; ceci provoque cependant la perte de tous les autres réglages.
Sur le devant de l'ampli tuner DVD, un petit trou marqué "RESET" se trouve à env. 2cm au-dessus de la
/
touche "
". Dépliez un trombone et enfoncez-en un bout env. 1 cm (horizontalement /tout droit)
dans ce trou jusqu'à ce que vous sentiez une résistance, là vous pouvez appuyer sur une touche remet-
tant tous les réglages à zéro – y compris le code oublié.
Celui-ci est ensuite remis sur le réglage de base /état de livraison "3308".
• "DEFAULTS"
Cette fonction permet de remettre à l'état d'origine (état de livraison) tous les réglages effectués dans le
menu Setup qui sont ainsi effacés !
e) "EXIT SETUP"
Quittez le menu Setup soit par ce point du menu (confirmer avec la touche "SELECT/ENTER") ou appuyez
sur la touche "SETUP" de la télécommande.
11. Commande de la lecture de DVD
a) Afficher le menu, touche "MENU"
Quand le DVD contient un menu (ce qui est le cas pour la majorité des DVD), il est possible de le faire appa-
raître sur l'affichage au moyen de cette touche. Dans un menu de DVD, il est possible par ex. d'appeler le
bonus (cad ce qui est en plus du film principal), effectuer les réglages audio ou de sous-titres, de passer
directement aux scènes choisies, etc., suivant ce qui se trouve sur le DVD concerné..
b) Lecture de DVD et arrêt sur image/pause, touche "
/ II
Appuyez sur la touche "
", pour démarrer la reproduction d'un DVD..
Appuyez à nouveau sur la touche pour arrêt sur image. Appuyez encore une fois sur la touche pour
reprendre la reproduction.
c) Interruption de la lecture ("Stop"); ouvrir / fermer le tiroir de charge-
ment, touche "
"
/
Pour terminer la reproduction du DVD, appuyez sur la touche "
pour déclencher l'ouverture du tiroir de chargement à moteur.
Ne fermez jamais le tiroir en l'enfonçant manuellement dans l'appareil !
d) Touches Skip pour la sélection du chapitre DVD, touches "I
"
I" de la télécommande ou les touches "
le devant de l'ampli tuner DVD
Elles permettent l'avance ou le retour sur les différents chapitres du DVD.
/ II
"
/
". Appuyer à nouveau sur cette touche
" et
I
/
" et "
" sur
/
I
69

Werbung

Kapitel

loading