Herunterladen Inhalt Inhalt Diese Seite drucken

Conrad 84 14 09 Bedienungsanleitung Seite 41

Gps-fahrradcomputer
Vorschau ausblenden Andere Handbücher für 84 14 09:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Start/stop stopwatch and GPS recording
• Press the "Set" button shortly to start the stopwatch. GPS recording in the internal memory
to calculate the distance covered starts simultaneously (data is saved at 10-second
intervals).
As a matter of course, there has to be appropriate GPS reception, see chapter
10.a). Please note that GPS reception is deactivated to save battery power if
no GPS signal can be recognised for 15 minutes.
• Press the "Set" button shortly to stop the stopwatch (e.g. to pause). Recording of GPS data
is stopped as well.
Press the "Set" button shortly to start the stopwatch again and continue recording GPS data.
• To save the GPS data, first press the "Set" button shortly to stop the stopwatch.
Then hold down the "Select" button for about 3 seconds.
The stopwatch is reset ("00:00:00") and the recorded GPS data is saved in a new dataset.
• Now you can start a new recording as described above.
Deleting all saved GPS data
• If you hold down the "Select" button for 5 seconds (stopwatch must not be running; if
necessary, press the "Set" button to stop it), the query "Clear all memory?" is displayed.
"No" is displayed next to the "Select" button. Press the "Select" button shortly to cancel
deleting.
"Yes" is displayed next to the "Set" button. Press the "Set" button shortly to delete all GPS
data and datasets. The memory is empty again (the displayed recording time is "11.3HR",
for example).
GPS data transfer to PC
See chapter 13.
41

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis