C) Stopwatch And Gps Recording - Conrad 84 14 09 Bedienungsanleitung

c) Stopwatch and GPS recording

Press the "Mode" button repeatedly until the
stopwatch symbol is displayed for a short time.
The current speed is displayed in the upper
section, the stopwatch is displayed in the middle
section, and the remaining memory for GPS data
is displayed in the lower section.

You can record data for up to approx. 10 hours.
If the memory is empty, a higher value (e.g. 11.3 hours) might be displayed.
This is due to the fact that additional data (e.g. time, data record number) has
to be recorded, which reduces the time available for recording GPS data.
So it is normal when the displayed recording time is reduced by more than 40
minutes during a 40-minute recording (stopwatch 0:40:00).
You can access more sub-functions by shortly pressing the "Select" button.
• "DST": Distance covered since the device was switched on last
• "AVS": Average speed
• "MEM": Remaining time for recording GPS data
40