Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

• Set the desired echo effects for the microphone input using the EFFECT (9), REPEAT (10), TIME (11) and
EFF LEVEL (13) controls (not supported for BN 1377550 devices).
- EFFECT = Echo effect settings for microphone
- REPEAT = Effect repetition rate
- TIME = Effect duration
- EFF LEVEL = Effect intensity
• To turn off the entire system when using an analogue input, turn off the active PA speaker using the
POWER switch (7). The LED POWER indicator turns off. Then turn off the connected audio signal device.
Switch position O: The device is turned off. Position I: The device is turned on.
b) Media player
The media player in the active PA speaker can be controlled using the built-in buttons and
controls or the remote control. Refer to "Controlling the media player using the remote control"
for more information.
• Before turning the speaker on, turn the MASTER (12) and VOL (16) controls to zero (turn to the left as far
as it will go).
• Turn on the active PA speaker using the POWER switch (21). The LED POWER indicator (14) turns on.
• The media player is now switched on.
• Insert the suitable storage media (SD card and/or USB stick) into the corresponding slots (5 & 6). The
media player will automatically search for playable media files and start to play them. Playback begins
with the tracks on the most recently inserted device.
• Press the MODE button (A) to change the playback medium. SD card > USB stick or USB stick > SD card.
• Press and hold the MODE button until the media player turns off.
• Press and hold the MODE button to turn the media player back on.
• Turn off the active PA speaker using the POWER switch. Die LED POWER indicator turns off.
41

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

13784021378401

Inhaltsverzeichnis