Time Adjustment - Conrad 61 00 57 Bedienungsanleitung

Time adjustment

First of all, the current time must be adjusted.
Turn the ring in the direction of the arrow to the right side and
adjust the current time, the correct time must be shown in opposite
to the arrow. If you install the timer like it is described, the ring turn
in 24hours on time complete around. The time at present is always
shown on the arrow.
If you put the timer out of the socket, the present time wont be
shown.
Switchprogramme adjustment
On the ring were pins, to adjust the time you want to switch on the
device.
Press the pins careful downwards to adjust the time, you want to
switch on the device.
Example:
You want, that a lamp lights from 20 p.m. to 22 p.m.
Press the pins in the sector between the number 20 and number 22
downwards.
In this case, it is possible to adjust more than one time to switch a
device on.
12