Herunterladen Diese Seite drucken

Conrad 41 60 75 Bedienungsanleitung Seite 2

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

All-in-one card reader 3.0
Item no. 41 60 75
1.
Intended use
The product is intended for reading and writing to compatible memory cards. It is designed
for a personal computer (PC) with USB 3.0 connection and is backward compatible with
USB 2.0 and 1.1. Only operate the product in a dry indoor environment.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If
you use the product for purposes other than those described above, the product may be
damaged. In addition, improper use can cause hazards such as short circuiting, fire, electric
shock etc. Read the instructions carefully and keep them. Make this product available to
third parties only together with its operating instructions.
2.
Delivery content
Card reader
USB 3.0 cable
Operating instructions
3.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
Persons / Product
The device is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. These may become dangerous
playing material for children.
Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
Do not place the product under any mechanical stress.
If it is no longer possible to operate the product safely, take it out of operation and protect
it from any accidental use. Safe operation can no longer be guaranteed if the product:
-
is visibly damaged,
-
is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
-
has been subjected to any serious transport-related stresses.
Please handle the product carefully. Jolts, impacts or a fall even from a low height can
damage the product.
Also observe the safety and operating instructions of any other devices which are
connected to the product.
Miscellaneous
Consult an expert when in doubt about operation, safety or connection of the device.
Maintenance, modifications and repairs are to be performed exclusively by an expert or
at a qualified shop.
If you have questions which remain unanswered by these operating instructions, contact
our technical support service or other technical personnel.
4.
Operation
1.
Switch your computer on and wait until the operating system has completely booted up.
2.
Plug the USB 3.0 plug of the USB 3.0 cable into the card reader.
3.
Plug the USB plug into an available USB port on your computer.
4.
Insert the memory card(s) into the corresponding slot with the correct orientation. Look
at the illustration printed on the housing of the card reader.
The card reader or the card may be damaged if the card is not inserted in
the correct orientation.
5.
A new drive / drives will appear on your computer. Follow the operating instructions for
your operating system to read and write to the card(s).
Important: SDXC memory cards use the so-called exFAT file system. With
Windows XP, this means you have to install an update, otherwise the SDXC
memory card will not be recognised! Visit the website www.microsoft.com and
search for an update for the exFAT file system. SDXC memory cards can only
be used with Windows XP after installing this update!
6.
Before removing the memory card(s), perform the necessary operations to ensure it
is safe to remove the card(s). Refer to the operating instructions for your operating
system.
5.
Disposal
Electrical and electronic products do not belong in the household waste.
Version 11/11
Dispose of the product according to the applicable statutory provisions at the end
of its service life.
6.
Technical data
Suitable for:
System requirements:
Cable length:
Operating temperature:
Operating humidity:
Dimensions (W x H x D): 85 x 15 x 53 mm
Weight:
These operating instructions are published by Conrad Electronic SE,
Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany.
All rights including translation reserved. Reproduction by any method, e.g.
photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited.
The operating instructions reflect the current technical specifications at time of print.
We reserve the right to change the technical or physical specifications.
© 2011 by Conrad Electronic SE.
SD, SDHC, SDXC, miniSD, miniSDHC, microSD, microSDHC,
CF, MMC, MMC Plus, MMC RS, MMC mobile, MMC micro,
xD, Memory Stick, Memory Stick Pro, Memory Stick Pro Duo,
Memory Stick Micro
Windows® XP, 7, Windows® Vista™
50 cm
0 to +40 ºC
40 – 80 % RH
41 g
V1_1111_02-HL

Werbung

loading

Diese Anleitung auch für:

Rubber blackMini blue41 60 87Blue