Solar Module Assembly And Connection; Charging The Battery; On/Off Switch Function - Conrad 11 04 47 Bedienungsanleitung

• Attach the mounting bracket to the wall using suitable mounting material.
• Adjust the LED spotlight to the desired position and then tighten the fastening
screws.

13. Solar Module Assembly and Connection

The solar module has a connection line of approx. 3 metres
length. During installation, observe that the installation site of
the solar module must not be farther than 3 metres from the bat-
tery junction box.
• The solar module mounting bracket has installation holes for attachment to the
desired installation site.
• Connect the connection plug of the connection line of the solar module to the
"Solar in" connection socket of the battery junction box.

14. Charging the battery

If the solar panel is covered by a protective foil for transit,
remove it before first charging the battery.
The integrated lead battery is not charged at delivery. We recommend
switching the ON/OFF switch with the "I/O" label to the "I" position for first
commissioning and to load the integrated lead battery for eight hours at full
solar radiation at perfect solar radiation to the solar module.

15. ON/OFF Switch Function

The ON/OFF switch with the "I/O" label at the battery junction box has the following
functions:
27