Notes For Installation Of The Led Spots (Item-No. 110446); Shadow-Free Solar Module - Conrad 11 04 47 Bedienungsanleitung

When selecting the LED spotlight position, ensure that it is not
subject to vibrations or extreme temperatures. This may lead to
damage or functional impairments..
Solar modules may only be used in a moderate climate. The
solar module is non-explosion protected equipment. Due to
this, it must not be installed close to flammable gases or fumes.
When mounting it on the wall, use screws and dowels that are
compatible with the composition of the wall. The included fas-
tening material is not suitable for all installation surfaces. Suit-
able different dowels or screws must be used for installation,
e.g. on an insulated facade. The product must be attached safe-
ly. Check this regularly. If the product falls, persons may be
injured and the device or ground may be damaged.
7. Notes for Installation of the LED Spots
(Item-No. 110446)
None of the connecting cables must be bent or squeezed. This
can result in malfunctions, short circuits and defects in the
device.
The LED Spots included in the delivery are delivered with a peg for fastening them
in the ground.

8. Shadow-free Solar Module

No shadow must fall on the solar module. If there is any shadow on the solar mod-
ule, no power will be generated. Even partial shadow will lead to a considerable
decrease of performance.
Please observe the following.
• Select an installation point where the solar module can face south.
24