D) Operating Door Opener; Playing Recordings; Setting The Volume - Conrad 55 13 19 Bedienungsanleitung


Sound transfer from the indoor unit to the speaker (3) of the outdoor unit is only active while the button "
(19) is pressed!
Releasing the button will automatically mute the microphone in the indoor unit for reasons of safety.
• To trigger the door opener, push the button "
for approx. one second. If the door opener is to trigger for a longer period, keep the button "
longer accordingly.
• After approx. one minute, the indoor unit switches to standby mode, the image goes out (power LED lights up).
Current recordings are terminated.

If you want to switch to standby mode before this, briefly press the button "/
recording is also terminated.

d) Operating Door Opener

If you want to operate the door opener without the visitor ringing the bell (e.g. if you have already recognised the visitor
through a window), proceed as follows:
• Briefly press the button "/
• To trigger the door opener, push the button "
• Once the visitor has opened the door, return the indoor unit to standby with the button "/

The indoor unit switches to standby automatically after one minute if no button is pushed.
e) Playing Recordings
If you have activated automatic recording in the OSD menu (see chapter 9), every push of the call button (4) will save
a recording. You can also start a recording manually (see chapter 8. b).
If new recordings are present, the LED "
To play back these recordings, either call the submenu "Event List" in the OSD menu or simply push the button
"/ " (18).

First switch on the indoor unit or push the button "/
For more information on the procedure when playing back present recordings, see chapter 9. d).
f) Setting the Volume
The buttons " V-" (20) and " V+" (22) can be used to reduce or increase the volume of the sound playback via
the indoor unit speaker (25).
36
/DEL" (24). Pushing the button briefly will activate the door opener
" (21). The indoor unit is activated, the camera image appears.
/DEL" (24).
" (17) is lit.
" (21) to activate the display.
"
OK
/DEL" (24) pressed
" (21). The current
" (21).