Connecting To The Network Through Lan Interface - Pioneer VSX-828-K Kurzanleitung

Connecting to the network through
LAN interface
VSX-828/VSX-528 only
Internet
Modem
PC
LAN cable (sold separately)
4
Note
• Refer to the operating instructions in the included CD-
ROM if you wish to connect a TV or playback component
in a method other than an HDMI connection.
• Refer to the operating instructions in the included CD-
ROM for other device connections.
Router
CAUTION
WAN
• Handle the power cord by the plug part. Do not pull out
the plug by tugging the cord, and never touch the power
LAN
cord when your hands are wet, as this could cause a short
1
circuit or electric shock. Do not place the unit, a piece of
2
furniture, or other object on the power cord or pinch the
3
cord in any other way. Never make a knot in the cord or tie
it with other cables. The power cords should be routed so
that they are not likely to be stepped on. A damaged power
VSX-528
cord can cause a fire or give you an electric shock. Check
the power cord once in a while. If you find it damaged,
ask your nearest Pioneer authorized independent service
company for a replacement.
Connecting up (continued)
When installing this unit, make sure to leave space around the
unit for ventilation to improve heat radiation (at least 40 cm at
top, 20 cm at rear, and 20 cm at each side).
WARNING
Slots and openings in the cabinet are provided for ventilation
to ensure reliable operation of the product, and to protect it
from overheating. To prevent fire hazard, the openings should
never be blocked or covered with items (such as newspapers,
table-cloths, curtains) or by operating the equipment on thick
carpet or a bed.
D3-4-2-1-7b*_A1_En