N) Mounting The Canopy; O) Application Of The Exhaust Openings - Reely Sky Fournier Rf-4D Bedienungsanleitung

n) Mounting the Canopy

Cut out the canopy (1) along the indicated line.
Put on the canopy and glue it to the model with adhesive tape (2) all around.

o) Application of the Exhaust Openings

To guide the exhaust air the motor hood releases into the fuselage outside again,
there must be an exhaust opening in the bottom of the fuselage.
Remove the iron-on foil above the oval cut-outs at the bottom of the fuselage
according to the figure with a soldering gun.
42
Figure 23
Figure 24