Package Contents; Technical Data; Declaration Of Conformity (Doc); Maintenance And Cleaning - Conrad 558094 Bedienungsanleitung

Package Contents

a b
i
e
f
h
a) Camera
b) Bicycle or motorcycle bracket
c) Curved mounting plate
d) Flat mounting plate
e) Rotatable camera holder
f) Camera holder
g) USB charging and data cable
Securing the Camera
a) Rotating attachment
• Press the camera (a) into the rotatable camera holder (e)
• Loosen the screw by turning it to the left
• Turn the camera holder to the desired position
• Tighten the screw by turning it to the right
Afterward, the rotatable camera holder (e) can be pushed into any desired attachment bracket:
• For attachment to motorcycle or bicycle with the bracket (b). This bracket in turn can likewise be opened
by turning to the left and then attached with the provided rubber strips to the crossbar or longitudinal bars.
Afterward, the screw must be tightened by turning it to the left
• For attachment to flat surfaces with the flat mounting plate (d), the protective film on the glue pads (the
delivery includes 2 pieces) must be removed in order to attach them
• For attachment to convex surfaces (e.g. helmet) with the curved mounting plate (c), the protective film on
the glue pads must be removed in order to attach them
To remove the camera holder from the various attachment options, press on the protruding tab with the
label "PUSH".
b) Fixed attachment
• Push the two openings of the camera holder (f) apart
• Insert the camera (a) into the camera holder
Afterward, the camera holder (f) can be pushed into any desired attachment bracket. For more information,
see the descriptions above.
To remove the camera holder from the various attachment options, press on the two protruding tabs.

Maintenance and Cleaning

Use a clean, lint-free, dry cloth to clean the housing and the lens. Do not use abrasive or chemical agents,
or cleaners containing solvents.
c
d
k
g
l
h) Carrying loop
i) Closing cap with holes (for microphone recordings)
j) Charging device
k) Replacement gaskets
l) Adhesive pads
m) Laser warning stickers
Disposal
a) General instructions
Dispose of an unserviceable product in accordance with the relevant statutory regulations.
b) Normal and Rechargeable Batteries
m
As the end user, you are required by law (Battery Ordinance) to return all used batteries/re-
chargeable batteries. Disposal in the domestic waste is prohibited!
Batteries/rechargeable batteries containing harmful substances are marked with the following
symbols. You can return your used batteries/rechargeable batteries free of charge to the official
collection points in your municipality, in our stores, or anywhere where batteries or rechargeable
batteries are sold!
j

Technical Data

Sensor resolution .........................5 megapixels CMOS
Resolution ....................................1920x1080P@30fps; 1280x720P@60fps
Battery output ..............................3.7 V/660 mAh 3.7 V / 660 mAh LiPo rechargeable battery
Recording time ............................1.5 h
Power ..........................................< 1.5W
External memory .........................microSD/microSDHC, max. 32 GB
Aperture .......................................135 degrees
Video format ................................H.264
Water-tightness............................10 m
Charging device ...........................5 V DC / 500 mAh
Weight .........................................60 g
Dimensions ..................................Diameter 24 x length 89 mm
b) Power charger
Operating voltage ........................100 - 240 V/AC, 50/60 Hz
Output ..........................................5 V/DC, 500 mA

Declaration of Conformity (DOC)

We, Conrad Electronic, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this product adheres
to the fundamental requirements and the other relevant regulations of Directive 1999/5/EC.
The Declaration of Conformity for this product can be found at www.conrad.com.
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
© Copyright 2014 by Conrad Electronic SE.