Herunterladen Inhalt Inhalt Diese Seite drucken

Making Connections - Monacor CS-50CU Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für CS-50CU:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
2
Safety Notes
The units (the controller CS-50CU and the microphone
stations CS-50DU/CS-50CH) correspond to all rele-
vant directives of the EU and are therefore marked
with
.
WARNING The controller uses dangerous mains
voltage. Leave servicing to skilled per-
sonnel only. Inexpert handling or modifi-
cation of the unit may result in electric
shock.
Please observe the following items in any case:
G
The units are suitable for indoor use only. Protect
them against dripping water and splash water, high
air humidity and heat (admissible ambient tempera-
ture range 0 – 40 °C).
G
Do not place any vessel filled with liquid on the units,
e. g. a drinking glass.
G
The heat generated inside the controller must be dis-
sipated by air circulation; never cover the air vents.
G
Do not operate the controller and immediately dis-
connect the mains plug from the socket
1. if one of the units or the mains cable is visibly
damaged,
2. if a defect might have occurred after a unit was
dropped or suffered a similar accident,
3. if malfunctions occur.
In any case the units must be repaired by skilled per-
sonnel.
G
Never pull the mains cable for disconnecting the
mains plug from the socket, always seize the plug.
G
For cleaning only use a dry, soft cloth; never use
water or chemicals.
G
No guarantee claims for the units and no liability for
any resulting personal damage or material damage
will be accepted if the units are used for other pur-
poses than originally intended, if they are not cor-
rectly connected or operated, or if they are not
repaired in an expert way.
G
Important for U. K. Customers!
The wires in this mains lead are coloured in
accordance with the following code:
green/yellow = earth
blue = neutral
brown = live
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug, pro-
ceed as follows:
1. The wire which is coloured green and yellow must
be connected to the terminal in the plug which is
marked with the letter E or by the earth symbol
or coloured green or green and yellow.
2. The wire which is coloured blue must be con-
nected to the terminal which is marked with the
letter N or coloured black.
3. The wire which is coloured brown must be con-
nected to the terminal which is marked with the
letter L or coloured red.
Warning – This appliance must be earthed.
If the units are to be put out of operation
definitively, take them to a local recycling
plant for a disposal which will not be harmful
to the environment.
3 Applications
The CS-50 system is used for technical support of con-
ferences and discussion meetings with up to 50 micro-
phone stations. Via additional audio connections on
the controller CS-50CU, further units (e. g. recorders,
amplifiers, wireless microphone systems, equalizers,
telecommunication) will easily be integrated.
Each microphone station (CS-50DU and CS-50CH)
is equipped with a high-quality microphone cartridge, a
speaker and two headphone jacks with a volume
control. CS-50CH, the microphone stations for chair -
persons are also provided with a priority button which
will allow chairpersons to interrupt other delegates for
their own announcements.
Various discussion modes (e. g. a defined number
of delegates talking at the same time or a talking time
with automatic limit), an indication of date and time, a
separate stopwatch feature, a key lock feature for the
controller and a test feature for all microphone stations
connected will allow versatile applications of the sys-
tem.

4 Making Connections

Always switch off the units prior to making or changing
any connections!
4.1 Microphone stations
For connecting the microphone stations, the two jacks
"Trunk in/out" (19) are provided on the controller. Each
of the two jacks will allow connection of a chain of up
to 25 microphone stations of the type CS-50CH and/or
CS-50DU.
1) Connect the plug (29) of the first microphone station
to one of the jacks "Trunk in/out" (19).
2) Connect the plug (29) of the second microphone
station to the jack (28) on the rear side of the first
microphone station (or to the other jack "Trunk
in/out" on the controller).
3) Connect further microphone stations in the same
,
way. The CS-50CH and CS-50DU units may be
connected in any order. The number of microphone
stations connected to the two jacks on the controller
may also be different.
GB
11

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Cs-50duCs-50ch

Inhaltsverzeichnis