Cleaning Agent Dose Controlling; Cleaning Agent Tank; Cleaning/Maintenance/Storage; Waste Disposal And Environmental Protection - Parkside PHS 29 A1 Originalbetriebsanleitung

GB IE NI
1. Release the cap nut (10) on the adap-
ter (9) and the cap nut (2) on the upper
extension tube (3).
2. Release the locking devices by pres-
sing and turning through 90° in the
opposite direction (bayonet locking
device).
Cleaning agent dose
controlling
Once the cleaning operation has
been completed, fully turn the dose
controller (8) for the cleaning agent
(clockwise (–) ) until it closes to pre-
vent cleaning agent escaping.
1. You can automatically regulate the vo-
lume of cleaning agent that is released
by turning the cleaning agent dose
controller (8).
2. Turning the cleaning agent dose
controller (8) clockwise reduces the
volume of cleaning agent (–). Turning it
counter-clockwise increases the volume
of cleaning agent (+) accordingly.

Cleaning agent tank

1. Screw on the cleaning agent tank cap
(5) in a counter-clockwise movement.
You can pour in up to 210 ml liquid
cleaning agent.
2. Screw on the cleaning agent tank cap
(5) in a clockwise movement.
Using cleaning agents
Use a neutral, biodegradable cleaning
agent. Always use the cleaning agent in
accordance with the manufacturer's instruc-
tions.
6
Cleaning/maintenance/
storage
Always remove the mains plug of
the high pressure cleaner before
working on the device. Otherwise,
there is a risk of electric shock.
• Clean the equipment with a damp
cloth.
• The equipment is maintenance free.
• Store the equipment in a frost-proof
room.
Waste disposal and en-
vironmental protection
Be environmentally friendly. Return the
tool, accessories and packaging to a re-
cycling centre when you have finished with
them.

Spare parts/Accessories

Spare parts and accessories can be
obtained at
www.grizzly-service.eu
If you do not have internet access, please
contact the Service Centre via telephone
(see "Service-Center", page 7). Please
have the order number mentioned below
ready.
9 Adapter ................... 30300505
3 Upper extension tube . 91104811
4 Lower extension tube . 91104810
5-8 Brush ....................... 91104812