Maintenance And Cleaning; Technical Data - Conrad 1278722 Bedienungsanleitung

Maintenance and cleaning

• Disconnect the cables and the connected devices before starting to clean the product.
• Never submerge the product in water.
• There are no components located inside the product you need to maintain. Never open/dismantle the
product.
• To clean the product, a dry, soft and clean cloth is sufficient. Do not apply too much pressure to the housing
to prevent scratching.
• Under no circumstances use aggressive cleanings agents, cleaning alcohol or other chemical solutions
since these can penetrate the housing or impair functionality.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.

Technical data

a) Product
Input voltage/current .................... 5 V/DC, 2 A
Required patch cable ................... CAT5e or CAT6, max. 100 m, 1:1 connected, fully wired
Connection type ........................... RJ45
USB standard .............................. USB 2.0
Supported operating systems ..... Windows
Vista™ (32/64 bit), 7 (32/64 bit), 8, 8 Pro, 8 Enterprise, 8.1, Win RT,
Mac OS X and higher, Linux
Operating conditions .................... -20 to +75 ºC, 5 – 90 % RH (non condensing)
Storage conditions ....................... -20 to +70 ºC, 5 – 90 % RH (non condensing)
USB cable length ......................... 120 mm (per transmitter and receiver)
Dimensions (W x H x D) .............. 42 x 26 x 65 mm (per transmitter and receiver)
Weight ......................................... 47 g (transmitter), 41 g (receiver)
b) Power adapter
Input voltage/current .................... 100 - 240 V/AC, 50/60 Hz, 0.35 A
Output voltage/current ................. 5 V/DC, 2 A
Protection class ...................... ..... II
XP (Home, Pro, with SP1, SP2, SP3), only 32 bit,
®
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
(www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited. This publication represent the technical status at the time of
printing.
© Copyright 2015 by Conrad Electronic SE. V1_0115_02-HK