Changing The Engraving Tips - Parkside PGG 15 C2 Originalbetriebsanleitung

Changing the engraving tips

CAUTION! RISK OF INJURY!
► Switch the appliance off and remove the power plug before
commencing any work to the appliance.
♦ Change the engraving tip
and no longer delivers the desired engraving results. Turn the
engraving tip lock
can be removed.
♦ Remove the spring and washer.
♦ Slide the washer and spring onto a new engraving tip
insert it into the appliance and turn the engraving tip lock
clockwise to lock the tip.
♦ Ensure that the engraving tip
│
■ 46 GB
as soon as it becomes worn
anticlockwise until the engraving tip
is fixed correctly in place.
. Then
PGG 15 C2