Inhaltsverzeichnis
Werbung
Bereiche der verschiedenen Temp-Fühler:
K – Type –200°C bis +1372°C (–328°F bis +1999°F)
J – Type –210°C bis +1200°C (–346°F bis +1999°F)
T – Type –200°C bis +400°C (–328°F bis +752°F)
E – Type –200°C bis +1000°C (–364°F bis +1832F)
Achtung!
Eine Überschreitung der max. zulässigen Eingangsgrößen bzw.
ein Kurzschluß der Quellenimpedanz kann zur Beschädigung
des Stromkalibrators führen.
18
Introduction
Dear Customer
By purchasing the TC – 1 thermocalibrator, you have acquired a
highly precise calibration tool that conforms to the latest state of the
art in calibration aids for your temperature measuring equipment.
The calibration range extends from
–200°C to a maximum of +1372°C. In addition, the calibrator can be
used as a two-channel thermometer. Measurement of T1 and/or T2
or the difference between the two temperatures. Illumination is also
available for unfavourable lighting conditions as well as a feature for
switching the measuring unit from "°C" to "°F".
The temperature is displayed relative to internally valid reference
tables for K – /T –/ J –/ E – thermosensors (N.I.S.T. Monogr. 175,
changed to IST – 90).
The thermocalibrator was manufactured based on EN 61010 – 1
(= DIN VDE 0411 / Part 1). The TC – 1 is EMC-tested and meets
the requirements of applicable European and national regula-
tions. Proof of conformity has been submitted and the manu-
facturer has the corresponding documents on file.
To maintain this status and ensure safe operation, you as the user
must comply with these operating instructions.
In case of questions, consult our technical
information service
Germany: Tel. 0180/5 31 21 16 or 09604/40 88 47
Fax 09604/40 88 44
e-mail: tkb@conrad.de
Mon - Fri 8.00 to 18.00
19
Werbung
Inhaltsverzeichnis
