Herunterladen Inhalt Inhalt Diese Seite drucken

Correct Use - Conrad TC-1 Bedienungsanleitung

Thermokalibrator
Inhaltsverzeichnis

Werbung

Austria: Tel. 0 72 42/20 30 60 · Fax 0 72 42/20 30 66
e-mail: support@conrad.at
Mon - Thu 8.00 to 17.00
Fri. 8.00 to 14.00
Switzerland: Tel. 0848/80 12 88 · Fax 0848/80 12 89
e-mail: support@conrad.ch
Mon - Fri 8.00 to 12.00, 13.00 to 17.00

Correct use

- Function as a thermocalibrator from –200°C to a maximum of
+1372°C or from –364°F to a maximum of +1999°F for the follow-
ing types of sensors: K – Type, J – Type, T – Type and E – Type.
- Measurement of temperatures in the range from –220°C to
+1372°C (–364°F to +1999°F), depending on the types of tem-
perature sensors connected (K –, T –, J – or E – Type).
- Operation must not be carried out under unfavourable ambient
conditions. The following are unfavourable ambient conditions:
- Damp or too high humidity
- Dust or combustible gases, vapours or solvents
- Storms or stormy conditions such as strong electrostatic fields,
etc.
Use other than that described above will lead to damage to the
measurement device and additional risks, such as short circuit, fire,
electric shock etc. No part of the product may be changed or modi-
fied. The safety instructions must be observed without fail.
20
Überlauf
Batterielebensdauer
Erforderliche Batterie
Automatische Abschaltung
(Auto Power Off)
Arbeitstemperatur
Temperatur für garantierte
Genauigkeit
Gewicht
Abmessungen (L X B X H) : 195 x 92 x 53 mm (Aufstellbügel
B Meßtoleranzen
Angabe der Genauigkeit in ±(% bezogen auf den Bereichsendwert +
direkte Gradabweichung)
Genauigkeit 1 Jahr lang bei einer Temperatur von +23∞C ±5 K, bei
einer rel. Luftfeuchtigkeit von kleiner als 75%, nicht kondensierend.
Der Meßfehler der Temperaturfühler ist nicht berücksichtigt.
Bereich
Genauigkeit
–220°C bis –60°C
±(0,10%+2°C)
–60°C bis +1372°C
±(0,10%+1°C)
–364°C bis –76°C
±(0,10%+4°F)
–76°C bis +1999°F
±(0,10%+2°F)
Kalibrierbereich von –200°C bis +1372°C (–328°F bis +1999°F)
: –OL für Overload (Überlast bzw.
Überlauf) wird angezeigt.
: ca. 100 Stunden
: 9-V-Blockbatterie, Typ: NEDA 1604
6F22 oder 006P oder 6LR61
: nach ca. 30 Minuten ohne Tasten-
betätigung schaltet der TC – 1 auf
Stand By (Bereitschaft)
: 0°C bis +50°C, dabei rel. Luftfeuch-
tigkeit < 80%, nicht kondensierend
: +23∞C ±5 K (=Kelvin), rel. Luft-
feuchtigkeit < 75%, nicht konden-
sierend
: ca. 250 g (mit Batterie, ohne
Anschlußleitungen)
eingeklappt, ohne Meßleitg.)
Auflösung
0,1°
0,1° / 1°
0,1°
0,1° / 1°
17

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis