WALL CHASER PMNF 1350 B2
GB
Introduction
IE
Congratulations on the purchase of your
new appliance. You have selected a high-
quality product. The operating instructions
are part of this product. They contain important in-
formation on safety, usage and disposal. Before
using the product, familiarise yourself with all hand-
ling and safety guidelines. Use the product only
as described and for the range of applications
specified. Please also pass these operating instruc-
tions on to any future owner.
Intended use
The wall grinder (standard nomenclature: abrasive
cutting appliance), hereinafter referred to as the
appliance, is designed for making cuts or slits
(without the use of water) in firmly supported and
primarily mineral materials such as concrete or ma-
sonry, using the guide carriage and in combination
with an approved industrial dust extractor. Any
other usage of or modification to the appliance
is deemed to be improper and carries the risk of
serious personal injury. Not for commercial use.
Features
ON/OFF switch
Handle
Dust extraction adapter
Union nut
Blade guard
Mounting flange (with thread)
Locking screw for the depth stop
Depth stop
Additional handle
Safety lock-out
Spindle lock
Roller
Reducer
Centring flange
Intermediate layers
Face spanner
Hand chisel
2
Package contents
1 wall chaser
2 cutting discs (pre-fitted)
1 face spanner
1 dust extraction adapter (pre-fitted)
1 reducer (for use with the dust extraction adapter
and a dust extractor hose of ∅ 32 mm)
1 hand chisel
1 operating manual
Technical data
Input voltage:
Power consumption:
Rated speed:
Washer Ø:
Central fixing bore:
Groove depth:
Groove width:
Thread:
Protection class:
Weight:
Noise and vibration data:
The noise and vibration values have been
determined in accordance with EN 60745.
Sound pressure level L
pA
Uncertainty K
:
pA
Sound power level L
:
WA
Uncertainty K
:
WA
Wear hearing protection!
The effect of noise can lead to hearing
loss.
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 60745.
Details of vibration values (when cutting off a
concrete plate):
Main handle: a
= 5.450 m/s
h
Uncertainty K = 1.5 m/s
Auxiliary handle: a
= 4.737 m/s
h
Uncertainty K = 1.5 m/s
230 V ~ 50 Hz
(Alternating current)
1350 W
9000 min
-1
125 mm
22.23 mm
0–30 mm
8–26 mm
M14
II /
approx. 4.15 kg
:
98.0 dB(A)
3 dB
109.0 dB(A)
3 dB
2
2
2
2
PMNF 1350 B2