Introduction; Intended Use; Features; Package Contents - Parkside PSS 250 A1 Originalbetriebsanleitung

ORBITAL SANDER PSS 250 A1
GB
IE

Introduction

CY
Congratulations on the purchase of your
new appliance. You have selected a high-
quality product. The operating instructions
are part of this product. They contain important infor-
mation on safety, usage and disposal. Before using
the product, familiarise yourself with all operating
and safety instructions. Use the product only as de-
scribed and for the specified areas of application.
Please also pass on these operating instructions to
any future owner.

Intended use

This orbital sander is intended for the dry sanding
of wood, metal and paintwork. Any other uses of
or modification to the appliance is deemed to be
improper and carries the risk of serious personal
injury. The manufacturer accepts no responsibility
for damage attributable to misuse. The appliance
is not meant for commercial use.

Features

ON/OFF switch
Locking button for ON/OFF switch
Release button
Dust collector
Nozzle (suction)
Adapter for external vacuum extraction
Clamping rails
Clamping lever
Sanding pad
Sanding sheet
Speed selector
Grip
2

Package contents

1 orbital sander PSS 250 A1
1 sander sheet (grain size 120)
1 dust collector
1 adapter for external vacuum extraction
1 operating instructions

Technical data

Rated voltage:
Nominal power input:
Idle speed:
Idle oscillation speed:
Sanding sheet dimensions: Velcro fastener
Protection class:
Noise and vibration data:
Noise measurement value determined in accord-
ance with EN 60745. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level L
PA
Sound power level L :
WA
Uncertainty K:
Wear hearing protection!
Vibration values (vector total of three directions)
determined in accordance with EN 60745:
Vibration emission value a
Uncertainty K = 1.5 m/s
NOTE
► The vibration level specified in these instruc-
tions has been measured in accordance
with the standardised measuring procedure
specified in EN 60745 and can be used to
make equipment comparisons. The specified
vibration emission value can also be used to
make an initial exposure estimate.
230 V ~ 50 Hz
250 W
n 7000–12000 rpm
0
n 14000–24000 rpm
0
92 x 182 mm
Clamp
92 x 230 mm
II /
: 79 dB (A)
90 dB (A)
3 dB (A)
= 10.2 m/s 2
h
2
PSS 250 A1