Introduction; Intended Use; Features; Package Contents - Parkside PSFS 250 A1 Originalbetriebsanleitung

COMBINATION CUTTER
PSFS 250 A1

Introduction

Congratulations on the purchase of your
GB
new appliance. You have selected a high-
MT
quality product. The operating instructions
are part of this product. They contain important
information on safety, usage and disposal.
Before using the product, familiarise yourself with all
handling and safety guidelines. Use the product only
as described and for the range of applications speci-
fied. Please also pass these operating instructions on
to any future owner.

Intended use

This appliance is intended for the processing of
materials such as wood, plastic, fibreboard, wall
tiles, aluminium and sheet metal with the recom-
mended tools and accessories. It is also suitable
for grinding with a range of cylindrical grinders
and for milling with milling bits of 4.8 mm shaft
diameter. Any other usage of or modification to the
appliance is deemed to be improper and carries
the risk of serious personal injury. The manufacturer
accepts no responsibility for damage(s) attributable
to misuse. Not for commercial use.

Features

Locking switch
Infinitely variable speed control
Power cable
ON/OFF switch
Wing adjusting screw
Extraction nozzle
Baseplate
Collet chuck
Wing screw (footplate)
Tensioning nut
Spindle lock button
Ventilation slits
Swivel lock
Open-ended spanner
Circular/parallel cutting attachment
12
Abrasive belt mandrel
Abrasive belt
Slotting cutter (HSS)
Multipurpose milling cutter (HSS)
Adapter (extraction nozzle)

Package contents

1 combination cutter PSFS 250 A1
1 rip fence with circular cutting function
1 dust extraction adapter
1 open-ended spanner
1 multipurpose milling cutter (HSS)
1 slotting cutter (HSS)
1 abrasive belt mandrel
6 abrasive belts
1 operating instructions

Technical data

Rated power input:
Rated voltage:
Idle speed:
Collet capacity:
Protection class:
Noise and vibration data:
Noise measurement value determined in accordance
with EN 60745. The A-rated noise level of the
power tool is typically as follows:
Sound pressure level:
Sound power level:
Uncertainty K:
Wear hearing protection!
Weighted acceleration, typically:
Hand/arm vibration a
h
Uncertainty K = 1.5 m/s
250 W
230 V ~ , 50 Hz
n 10000–28000 min
0
4.8 mm
II /
75 dB (A)
86 dB (A)
3 dB
< 2.5 m/s 2
2
PSFS 250 A1
-1