Wall Installation Of Electronic Module (Part No. 72570P1) - Honeywell 76910C1 Bedienungs- Und Installationsanleitung

6.3

Wall installation of electronic module (Part No. 72570P1)

The components of the electronic module are placed in a flush switch box or alternatively mounted directly
onto the wall.
B
A
B
1
Fig. 7: Installation sequence for electronic module (Part No. 72570P1)
Fastening holes for installation in flush switch box
A
Fastening holes for surface installation (on wall)
B

Connection mount for electronic module

Electronic module

Service socket
Description
1. Position the connection mount  on the wall or flush switch box in the correct orientation. Use the fastening
holes for installation on flush switch boxes and fastening holes
A
2. Affix the connection mount with corresponding screws.
3. Insert the electronic module  into the connection mount  (Note the position of the service socket ).
76910XE / 02.2018
B
A
A
A
B
2
3
Compact Call Set
for wall installation.
B
21